Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Norell Inc THIN- WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 3.52mm OD X 3mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4
THIN- WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 3.52mm OD X 3mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4
Pacer Global LLC Saint Gobain SaniTech Ultra-C Tubing, 1" ID, 1.375" OD, 0.1875" Wall, 50 Foot Coil, 1/EA
Saint Gobain SaniTech Ultra-C Tubing, 1" ID, 1.375" OD, 0.1875" Wall, 50 Foot Coil, 1/EA
Pacer Global LLC Saint Gobain SaniTech Ultra-C Tubing, 1" ID, 1.25" OD, 0.125" Wall, 50 Foot Coil, 1/EA
Saint Gobain SaniTech Ultra-C Tubing, 1" ID, 1.25" OD, 0.125" Wall, 50 Foot Coil, 1/EA
Pacer Global LLC Saint Gobain SaniTech Ultra-C Tubing, 0.0625" ID, 0.25" OD, 0.09375" Wall, 50 Foot Coil, 1/EA
Saint Gobain SaniTech Ultra-C Tubing, 0.0625" ID, 0.25" OD, 0.09375" Wall, 50 Foot Coil, 1/EA
Pacer Global LLC Saint Gobain SaniTech Ultra-65 Tubing, 0.625" ID, 1" OD, 0.1875" Wall, 50 Foot Coil, 1/EA
Saint Gobain SaniTech Ultra-65 Tubing, 0.625" ID, 1" OD, 0.1875" Wall, 50 Foot Coil, 1/EA
Pacer Global LLC Saint Gobain SaniTech Ultra-C Tubing, 0.25" ID, 0.4375" OD, 0.09375" Wall, 25 Foot Coil, 1/EA
Saint Gobain SaniTech Ultra-C Tubing, 0.25" ID, 0.4375" OD, 0.09375" Wall, 25 Foot Coil, 1/EA
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 3-Stop, PVC, 1.52 mm ID; 12/PK
Three-Stop PVC Color-coded Autoanalysis Tubing for Ismatec Pumps is USP Class VI tubing that is Phthalate-free. It has a long pumping life and exhibits a wide range of acid and chemical resistance, thus making it an ideal choice for Pharmaceutical industries. Plasticizer is very tightly bonded into the material, preventing any leaching of component chemicals into the medium being transported, maintaining its sterility. The tubing is transparent, which allows visual observation of tubing contents. It also offers very low gas permeability and can withstand high pressure contents.
Tubing is also called TAAT / microbore and auto analysis.
The overall length of Lab PVC 95625-series stop tubing is 16" (406 mm). The legacy Ismatec stop tubing was 400 mm long.
Order extension tubing under "Accessories". For technical assistance selecting tubing formulations and sizes, contact our Application Specialists.
Ace Glass, Inc. FEP tubing, 1/8in OD x 1/16in ID, 10ft length
1/8 O.D. x 1/16 I.D. FEP tubing made of high molecular weight resin for excellent stress crack resistance. Meets FDA requirements for repeated food contact. Chemically inert to most industrial chemicals and solvents. 10ft length.
Helix Medical Inc TUBING SIL .250 X .500 50FT
Platinum cured, non-implantable, non-adherent tubing for bio/pharma industry standards. Ability to operate at elevated temperatures. Will not oxidize/deteriorate. Can be sterilized with autoclave, ethylene oxide, or gamma.
Braintree Scientific Polyethylene .034"""" x .060"""" Per Ft.,50 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S 2-Stop Precision Pump Tubing, BioPharm Plus Platinum-Cured Silicone, L/S 13; 8/pk
Applications: Pharmaceutical, biotechnology, peristaltic pumping, and food applications Characteristics: Excellent heat resistance, low compression set, odorless, nontoxic, translucent Choose our BioPharm Plus Silicone (Platinum-Cured) tubing for purity, flexibility, and longer tubing life. Ideal for pharmaceutical and biotechnological applications, this tubing exceeds USP class VI, 3A sanitary standards, and is FDA compliant. Based on your application needs, choose Precision tubing or High-Performance precision tubing. High-Performance precision tubing has a thicker wall that improves pressure generation suction lift and the ability to pump viscous fluids. BioPharm Plus Silicone (Platinum-Cured) tubing has a working temperature range of ¿75 to 450¿F (¿60 to 232¿C). Tubing can be sterilized by autoclave, gamma radiation, or ethylene oxide. For use with Masterflex multichannel pump heads
Accuflow Systems TPE Tubing
Purity One™ OneFlex Biopharmaceutical grade TPE tubing has been formulated for demanding and critical fluid transfer applications in Biopharmaceutical processing. OneFlex is an excellent choice for applications that require heat sealing and sterile welding capabilities, and also can be molded for single-use assemblies such as bottle top inserts. Purity One OneFlex is an excellent choice for applications such as sampling, aseptic welding, aseptic sealing, filtration, and sterile filling and transfer. Full validation guide and USP <665> Extractables testing available.
Accuflow Systems TPE Tubing
Purity One™ OneFlex Biopharmaceutical grade TPE tubing has been formulated for demanding and critical fluid transfer applications in Biopharmaceutical processing. OneFlex is an excellent choice for applications that require heat sealing and sterile welding capabilities, and also can be molded for single-use assemblies such as bottle top inserts. Purity One OneFlex is an excellent choice for applications such as sampling, aseptic welding, aseptic sealing, filtration, and sterile filling and transfer. Full validation guide and USP <665> Extractables testing available.